Sentra GXE L4-1.8L (QG18DE) (2000)
1. Drain engine coolant from radiator and cylinder block. Be careful not to spill coolant on drive belts.
2. Remove the following belts.
-
Power steering pump drive belt
-
Alternator drive belt
3. Remove front RH wheel.
4. Remove front right-side splash undercover.
5. Remove front exhaust tube.
6. Disconnect vacuum hoses for:
-
EVAP canister
-
Brake power booster
-
Fuel pressure regulator
7. Remove ignition coils.
8. Remove spark plugs.
9. Remove rocker cover bolts in numerical order as shown in the figure.
10. Set No. 1 piston at TDC on its compression stroke.