Sentra GXE L4-1.8L (QG18DE) (2000)
2. Remove PCM harness protector.
3. Perform all voltage measurements with the connector connected. Extend tester probe as shown to perform tests easily.
-
Open harness securing clip to make testing easier.
-
Use extreme care not to touch 2 pins at one time.
-
Data is for comparison and may not be exact.
CAUTION: Do not use PCM ground terminals when measuring input/output voltage. Doing so may result in damage to the PCM's transistor. Use
a ground other than PCM terminals, such as the ground.
PCM Harness Connector Terminal Layout