Sentra GXE L4-1.8L (QG18DE) (2000)
11.
Data transfer will take about 1 minute and the progress of the transfer is displayed on the ASIST PC screen (see Figure 13). Wait until the data
transfer is complete (see CAUTION, below).
CAUTION:
DO NOT DISCONNECT THE ETHERNET CABLE UNTIL "COMPLETE" IS DISPLAYED AS SHOWN IN FIGURE 14. If the cable is
disconnected before "Complete" is displayed you MUST restart the download procedure. Otherwise ECM damage can occur.
If the cable is disconnected during the transfer; close ASIST, push "Control/Alt/Delete" and select End task. Then return to step 5.
12.
When transfer is complete select the "Main Menu" button on ASIST. Turnoff CONSULT-II and disconnect the AC power cord and the Ethernet
cable from CONSULT-II.