nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Methods of Preventing Over-Discharge|Page 10292 > < Checking Electrolyte Level|Page 10289
Page 1
background image

Battery: Service and Repair
Methods of Preventing Over-Discharge

CAUTION:

-

If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery.

-

After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.

-

Never add distilled water through the hole used to check specific gravity.

The following precautions must be taken to prevent over-discharging a battery.

-

The battery surface (particularly its top) should always be kept clean and dry.

-

The terminal connections should be clean and tight.

-

At every routine maintenance, check the electrolyte level.
This also applies to batteries designated as "low maintenance" and "maintenance-free".

-

When the vehicle is not going to be used over a long period of time, disconnect the negative battery terminal.

-

Check the charge condition of the battery.
Periodically check the specific gravity of the electrolyte. Keep a close check on charge condition to prevent over-discharge.

Methods of Preventing Over-Discharge|Page 10292 > < Checking Electrolyte Level|Page 10289