Sentra GXE L4-1.8L (QG18DE) (2000)
Clutch Slave Cylinder: Service and Repair
Disassembly and Assembly
Disassembly
Remove dust cover, and remove piston assembly from cylinder body.
Inspection
Inspect for the following, and replace parts if necessary.
-
Damage, foreign material, wear, rust, and pinholes on the cylinder inner surface, piston, and sliding part of piston cup
-
Weak spring
-
Crack or deformation of dust cover
Assembly
1. Apply rubber lubricant to the overall inside surface of the cylinder body. Also, apply rubber grease to the piston. Then insert the piston assembly
into the cylinder body.
2. Install dust cover.