Sentra GXE L4-1.8L (QG18DE) (2000)
5. Remove snap ring C, then remove ball cage, inner race and balls as a unit.
6. Draw out boot.
-
Cover drive shaft serrations with tape to prevent damage to the boot.
Wheel Side
CAUTION: The joint on the wheel side cannot be disassembled.
1. Before separating joint assembly, put matching marks on drive shaft and joint assembly.
2. Separate joint assembly with a suitable tool. Be careful not to damage threads on drive shaft.
3. Remove boot bands.
Support Bearing
1. Remove dust shield.
2. Remove snap ring.