Sentra GXE L4-1597cc 1.6L DOHC MFI (GA16DE) (1999)
Diode: Testing and Inspection
MAIN DIODES
^ in order to check diodes, they must be unsoldered from the stator.
^ Use an ohmmeter to check condition of diodes as indicated in chart.
^ If any of the test results are not satisfactory, replace diode assembly.
Electrical Component Inspection
DIODE CHECK
^ Check continuity using an ohmmeter.
^ Diode is functioning properly if test results are as shown in the figure.
NOTE: Specifications may vary depending on the type of tester.