Sentra Hatchback Coupe L4-1597cc 1.6L SOHC (E16i) (1987)
Engine Control Module: Pinout Values and Diagnostic Parameters
1. Disconnect battery ground cable.
2. Remove assist side or bench seat from vehicle.
3. Disconnect 20- and 16-pin connector from E.C.U.
4. Remove pin terminal retainer from 20- and 16-pin connector to make it easier to insert tester probes.
5. Connect 20- and 16-pin connector to E.C.U. carefully.
6. Connect battery ground cable.
7. Measure the voltage at each terminal by following "E.C.U. inspection table".
CAUTION: