Sentra Hatchback Coupe L4-1597cc 1.6L SOHC (E16i) (1987)
Wheel Bearing: Technical Service Bulletins
Rear Wheel Bearing - Lock Nut Design Change
Models
1987 Sentra (2WD)
Section
Rear Axle & Suspension
Classification
RA87-001
Bulletin No.
TS87-004
Date
January 30, 1987
REAR WHEEL BEARING LOCK NUT
APPLIED MODEL: 1987 Sentra, 2WD Models
APPIED DATE: August, 1986
SERVICE INFORMATION
Starting with the Applied Date above, 1987 Sentra 2WD vehicles have been manufactured with a new rear wheel bearing lock nut retention system. For
improved serviceability, an adjusting cap and cotter pin is now used on the lock nut. In addition, the shaft end has been slightly modified to accept the
cotter pin. Please note also that the wheel bearing lock nut torque range has been reduced. The subject components are highlighted below.
PARTS INFORMATION
PART NUMBER
PART NAME
NEW
FORMER
Spindle-rear housing, R.H.
43040-61A05
43040-61A00
Spindle-rear housing, L.H.
43041-61A05
43041-61A00
Nut-lock, rear wheel
43262-50A05
43262-50A01