Sentra Hatchback Coupe L4-1597cc 1.6L SOHC (E16i) (1987)
Window Seal: All Technical Service Bulletins
Windows - Air Leak When Rolled Up
Reference:
TECHNICAL BULLETIN TS86-136 Date: July 28, 1986
Classification:
BF86-024 Section: Body and Frame Models: 1987 Sentra (B12) Coupe
Rubber Run
AFFECTED VEHICLES: 1987 Sentra (B12) Coupe
SERVICE INFORMATION
Some 1987 Sentra (B12) Coupes may have an air leak noise at the window rubber run. The noise occurs because the window glass does not properly
seat in the rubber run when the window is rolled up. Upon inspection, if the window is observed to contact the outer edge of the rubber run (see Figure
1), use the following Service Procedure to correctly align the window.
Window Regulator Assembly
SERVICE PROCEDURE
1.
Remove the front door finisher assembly.
2.
Remove the window regulator assembly (Figure 2).
3.
Drill out the spacer spot welds, then remove the spacer from the regulator tracks (Figure 2).