Sentra SE-R Spec V L4-2.5L (QR25DE) (2002)
4. Put matching marks on inner race and drive shaft.
5. Remove snap ring, then remove ball cage, inner race and balls as a unit.
6. Draw out boot.
-
Cover drive shaft serrations with tape so as not to damage the boot.
Wheel Side (ZF90, B90 And B86 Type)
CAUTION: The joint on the wheel side cannot be disassembled.
1. Before separating joint assembly, put matching marks on drive shaft and joint assembly.
2. Separate joint assembly with a suitable tool.
-
Be careful not to damage threads on drive shaft.
3. Remove boot bands.
Support Bearing
1. Remove dust shield.
2. Remove snap ring.