nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Antitheft and Alarm Systems > < Antenna - Inoperative, Rod Maintenance & Replacement|Page 3382
Page 1
background image

Antenna: All Technical Service Bulletins
Maintenance - Cleaning Power Antenna & Wiper Blades

Models: See below
Section: Electrical
Classification: EL92-011
Bulletin No.: NTB92-083
Date: October 8, 1992

MAINTENANCE OF POWER ANTENNA AND WIPER BLADES

APPLIED MODELS:
All with Power Antenna; All Vehicles [Wiper Blades].

SERVICE INFORMATION:

1.

Maintenance of Power Antenna

It is recommended that the Power Antenna rod, in its extended position, be periodically wiped with a clean, soft, dry cloth. This is the most current
information from the factory concerning proper periodic maintenance of the Power Antenna.

I.

Maintenance of Wiper Blades

1.

To clean the rubber wiper blades, it is recommended to use a clean, soft, wet cloth [the cloth should be moistened with washer liquid].

2.

Before lowering the wiper blades onto the glass, it is advised to first clean the glass area swept by the wiper blade. Use an appropriate,
commercially-available glass cleaner and either paper towels or a lint-free towel.

NOTE:
If the vehicles you service are subject to ice and snow formation on the front or rear windshields, you may recommend to your customers that wiper
blade effectiveness, during these environmental conditions, may be optimized, if both snow and ice are removed prior to operating the wiper system(s).

Antitheft and Alarm Systems > < Antenna - Inoperative, Rod Maintenance & Replacement|Page 3382