nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

A/C - Water Condensation from Registers|Page 3174 > < A/C - New Connections & O-Rings|Page 3165
Page 1
background image

Evaporator Case: Customer Interest
A/C - Water Condensation from Registers

Reference:

TECHNICAL BULLETIN  TS86-087     Date:  May 28, 1986

Classification:

AC86-007      Section:  Air Conditioning    Models:  Sentra & Pulsar NX

Evaporator

APPLIED MODEL: Sentra and Pulsar NX

SERVICE INFORMATION

Sentra and Pulsar NX models with late production type A/C evaporators (see Evaporator Identification below) may spray water from the center vent or
leak water from the heater floor outlet during air conditioner operation. This condition usually occurs during periods of high temperatures (85~F and
higher) and high humidity (80% or more).  Use the following Parts Information and Service Procedure to correct incident vehicles.

EVAPORATOR IDENTIFICATION

REFER TO TECHNICAL BULLETIN AC83-022 FOR COUNTERMEASURE INFORMATION FOR THE EARLY PRODUCTION A/C
EVAPORATOR.

Glove Box

AIR CONDITIONING IDENTIFICATION

Dealer or Port Installed.  Vehicles with dealer or port installed air conditioning have an attachment plate installed behind the glove box as shown below.

A/C - Water Condensation from Registers|Page 3174 > < A/C - New Connections & O-Rings|Page 3165