Sentra Wagon FWD L4-1597cc 1.6L SOHC (E16i) (1988)
Technical Service Bulletin # BF89004
Date: 890330
Seat Belts - 3-Point Rear Belt Installation
Classification:
Section:
BF89-004
Body & Frame
Reference:
TECHNICAL BULLETIN TS89-050
Models:
Sentra, Stanza, Stanza Wagon, Pulsar Maxima, 200SX, 300ZX 2+2, Pathfinder Date:
March 30, 1989
3-POINT REAR SEAT BELT INSTALLATION
APPLIED MODELS: 1987-89 Sentra Sedan, Coupe and Wagon 1987-88 Sentra 3-Door Hatchback 1987-88 Stanza Sedan 1987-89 Pulsar 1985-87
Maxima Sedan 1984-88 200SX Hatchback 1986-89 Pathfinder
SERVICE INFORMATION
This bulletin describes 3-point rear seat belt installation procedures for the applied models listed above. These vehicles are already equipped with
threaded fittings for installation of the 3-point belts. However, in most cases, it will be necessary to modify or replace certain trim pieces to complete the
installation. Trim modification requires cutting/drilling of the quarter panel or trunk trim and, in some cases, the rear parcel shelf. The following pages
describe the installation procedures for each model.
Please make these instructions available to customers who purchase retro-fit kits and choose to install the belts themselves. Ensure that a copy of the
child seat installation instructions are provided to customers for every installation.
PARTS INFORMATION
The replacement parts necessary to complete the installation on each model are listed beginning on page 31 of this bulletin.
Child Restraint Installation With Rear 3-Point Seat Belts
Outboard shoulder/lap belt
Before using the locking clip, read the instructions attached to the clip.
Secure the child restraint with the lap belt as illustrated. To prevent slack in the lap belt, it will be necessary to secure the lap/shoulder belt in place with
a locking clip.
Use a genuine locking clip (part number 999JW-A3000, available from your NISSAN dealer), or one which is the same in dimension and strength.
NOTE:
When installing child restraint in a Sentra 3-dr. (Hatchback), unfasten shoulder belt at the buckle and follow owner's manual instructions for
rear lap belts.
Sentra Coupe