Sentra Wagon FWD L4-1597cc 1.6L SOHC (E16i) (1988)
Oil Pan: Service and Repair
Removal
1. Drain engine oil.
2. Remove the following parts.
^
Front right side splash cover
^
Front right side under cover
3. Remove center member.
4. Remove front exhaust tube.
5. Remove front buffer rod and buffer rod bracket.
6. Remove engine gussets.
7. Remove oil pan.
To remove oil pan:
(1) Insert seal cutter (Special Tool) between cylinder block and oil pan.
Caution: Do not use screwdriver. Oil pan flange will be deformed.
(2) Slide seal cutter by tapping its side with a hammer.
Installation
1. Before installing oil pan, remove all traces of liquid gasket from mating surface using a scraper.