Sentra Wagon FWD L4-1597cc 1.6L SOHC (E16i) (1988)
Timing Belt: Service and Repair
TIMING BELT REMOVAL
CAUTION:
-
After removing timing belt, do not rotate crankshaft and camshaft separately because valves will hit piston heads.
-
Do not bend or twist timing belt too tightly.
-
Ensure timing belt, camshaft sprocket, crankshaft sprocket and belt tensioner are clean and free from oil or water.
-
Before installing timing belt, confirm that No.1 cylinder is set at top dead center (T.D.C.) on compression stroke.
-
Align arrow in direction of timing belt rotation.
-
Adjust timing belt tension with all spark plugs removed.
1. Remove the following parts.
-
Front right side splash cover
-
Front right side under cover