Sentra Wagon FWD L4-1597cc 1.6L SOHC (E16i) (1988)
Drive Belt: Technical Service Bulletins
Poly-Groove Belt - Tension Inspection
Classification:
Section:
GI89-008
General Information
Reference:
SERVICE ADVISORY TS89-077
Models:
All models
Date:
May 18, 1989
When installing a new poly-groove belt or replacing a used one, use the following procedure.
1.
Install the belt and set the belt tension.
2.
Start the engine and run it for approximately 30 seconds. Switch the engine off.
3.
Check the belt tension and reset as needed.