Sentra Wagon FWD L4-1597cc 1.6L SOHC (E16i) (1988)
FIGURE 1
4.
Apply the campaign completion label (Figure 1) to the underside of the hood.
NOTE:
Installation of this sub-harness may result in a self diagnosis code of 35 appearing during future system diagnosis. This code is now
normal and does not indicate a malfunction.
Stanza Modification Procedure
FIGURE 5
1.
Disconnect the E.G.R. temperature sensor connector (24F) (Figure 5).
2.
Install the countermeasure sub-harness between the E.C.C.S. harness and the exhaust gas temperature sensor connector.
FIGURE 1
3.
Apply the campaign completion label (Figure 1) to the underside of the hood.
Warranty Instructions and Claim and Owner Letter Information
WARRANTY INSTRUCTIONS
A Service Campaign Claim may be entered via DATANET. The Service Advisor must make certain that the owner's name, address, vehicle
identification number, and PNC are listed correctly on the repair order to ensure accurate, readable information for claim submission. Dealers who are
not yet on DATANET should submit a standard S-1-S Warranty Claim.
WARRANTY CLAIM INFORMATION