Sentra Wagon FWD L4-1597cc 1.6L SOHC (E16i) (1988)
BASIC CHARACTERISTICS
An ON-duty signal is fed to the I.S.C. valve in response to the water temperature.
STARTING CORRECTION
A starting correction signal is added in response to the water temperature for improved engine startability.
This function continues for several seconds after the engine starts.
IDLE SPEED FEEDBACK CONTROL
When the following conditions are met after the starting correction has been completed, the idle speed feedback control function operates.
(1) Idle switch-ON
(2) Neutral switch - ON or below 8 km/h (5 MPH) (vehicle speed)
*: When battery voltage of less than 12 volts continues for a few seconds, the target idle speed will be maintained higher, in order to improve
charging function. (M/T only)