nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Trim Panel > < Technician Safety Information|Page 11686
Page 1
background image

Headliner: Service and Repair

CAUTION:  Disconnect both terminals from battery in advance.

1. Remove driver air bag module and steering wheel. Refer to "REMOVAL AND INSTALLATION".
2. Fully tilt front right and left seat backs backward.
3. Remove front pillar garnish, front and rear kick plates. Refer to "Removal and Installation".
4. Remove center pillar lower and upper garnish, and rear pillar garnish. Refer to "Removal and Installation".
5. Remove sun visors.
6. Remove interior lamp.
7. Remove assist grips (if equipped).[A]
8. Remove sunroof welt and door welts.
9. Remove sunroof switch and map lamp assembly.

10. Remove clips attached to roof.
11. Take out headlining from the front passenger door.

Trim Panel > < Technician Safety Information|Page 11686