Sentra XE L4-1.8L (QG18DE) (2000)
Brake Caliper: Service and Repair
Removal and Installation
Front
Removal
WARNING: Clean brake pads with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
Remove torque member fixing bolts and brake hose connecting bolt.
It is not necessary to remove brake hose connecting bolt except for disassembly or replacement of caliper assembly. In this case, suspend caliper
assembly with wire so as not to stretch brake hose.
Installation
CAUTION:
-
Refill with new brake fluid "DOT 3".
-
Never reuse drained brake fluid.