Sentra XE L4-1.8L (QG18DE) (2000)
11. Apply a continuous bead of Genuine RTV Silicone Sealant Part No. 999MP-A7007 or equivalent to mating surface of front cover.
-
Check alignment of mating marks on chain and crankshaft sprocket.
-
Align oil drive spacer with oil pump.
-
Place timing chain to the side of chain guide. This prevents the chain from making contact with water seal area of front cover.
12. Install front cover.
-
Make sure two O-rings are present.
-
Be careful not to damage oil seal when installing front cover.
13. Install cylinder head bolts at engine front side as shown.
-
Tightening procedure