Sentra XE L4-1.8L (QG18DE) (2000)
Evaporator Case: Service and Repair
Removal
1. Discharge the A/C system. Refer to "Discharging Refrigerant".
2. Disconnect the two refrigerant lines from the engine compartment.
Cap the A/C lines to prevent moisture from entering the system.
3. Remove the glove box and mating trim. Refer to "INSTRUMENT PANEL ASSEMBLY".
4. Remove cooling unit. Refer to "REMOVAL".
5. Disconnect the resistor and blower motor connector.
6. Remove blower unit.
7. Remove the three bolts and then remove the motor from the blower case.