Sentra XE L4-1.8L (QG18DE) (2000)
Fuel Level Sensor: Service and Repair
QG18DE (Except Calif. CA Model) And SR20DE
REMOVAL
1. Release fuel pressure from fuel line.
Refer to "Fuel Pressure Release".
2. Disconnect battery ground cable.
3. Open fuel filler lid and filler cap.
4. Remove rear seat cushion. Refer to "Removal and Installation".
5. Remove inspection hole cover located under the rear seat.
6. Disconnect harness connector.
7. Disconnect the quick connectors.
-
For disconnect of quick connectors, refer to step 5. of "Fuel Tank Removal".
8. Remove the six screws.