Sentra XE L4-1.8L (QG18DE) (2000)
B.
Select the applicable vehicle configuration for your vehicle from that listed in the upper right ECM data description window.
^
If "Update for all Models" is the only listing, go to step C.
^
If multiple selections are listed (M/T vs A/T, Fed vs Cal, etc.), select the applicable vehicle configuration then go to step C.
C.
Click the "Continue" button on the ECM Data Reprogramming screen to proceed to CONSULT-II setup.
9.
Turn on CONSULT-II as follows to access the file transfer mode:
A.
While pressing on the CONSULT-II screen with your thumb, quickly depress and release the ON/OFF switch (see Figure 11).
NOTE:
A double-beep will sound after the ON/OFF switch is quickly depressed and released.
Release your thumb from the screen after a double-beep sound is heard.
B.
Select "Transfer tiles via Lan" (see Figure 12). Set the CONSULT-II unit down for now.
NOTE:
If you accidentally choose a menu option other than "Transfer Files via Lan", turn CONSULT-II off and restart it according to step 9A above.
10.
On ASIST, make sure the Ethernet (IP) Address (for CONSULT-II) displayed in the "Change IP Address" box is the same number you printed in
step 4E or 4H, then select "Continue".
NOTE:
If the Ethernet (IP) Address (for CONSULT-II) displayed in the "Change IP Address" box is not correct, turn CONSULT-II off and return to
step 4 in this procedure.