Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
WARNING: Do Not Place Your Fingers In Front Of Piston.
2. Push out piston with dust seal with compressed air.
CAUTION: Do not scratch or score cylinder wall.
3. Remove piston seal with a suitable tool.
INSPECTION
Inspect all caliper components. See: Testing and Inspection
ASSEMBLY
1. Insert piston seal into groove on cylinder body.
2. With piston boot fitted to piston, insert piston boot into groove on cylinder body and install piston.
3. Properly secure piston boot.
INSTALLATION
1. Install caliper assembly.
Caliper Hose Installation
2. Install brake hose to caliper securely.
3. Install all parts and secure all bolts.
4. Refill with new "DOT 3" brake fluid and bleed air from the hydraulic system. Never reuse drained brake fluid. See: Brake Bleeding/Service and
Repair