Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
/Page-524005.png)
CAUTION:
One bolt is located on the water pump (see Figure 7).
*1: Located on engine front mounting bracket.
*2: Located on the water pump.
*3: Located on the power steering oil pump adjusting bar.
CAUTION:
Be careful not to tear or damage the cylinder head gasket.
28.
Remove the cylinder block to front cover alignment dowels.
CAUTION:
Do not hit the dowels or the cylinder block will crack.
29.
Wipe off the links of the lower timing chain next to the timing marks on the sprockets. Put paint marks on the timing chain, matching them with
the timing marks on the idler sprocket and crankshaft sprocket (see Figure 8).
Installation
1.
Install the crankshaft sprocket, making sure the mating marks face the front of the engine.
2.
Install the idler sprocket and lower timing chain using the mating marks and the paint marks made during the removal process.
CAUTION: