nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Audible Warning Device|Testing and Inspection > < Diagram Information and Instructions|Page 10232
Page 1
background image

Audible Warning Device: Description and Operation

If equipped with theft warning system, power is supplied at all times:

^

through 7.5 A fuse (No. (24) located in the fuse block [J/B])

^

to combination meter terminal (37) for the security lamp.

Ground for the security lamp is supplied when the system is activated:

^

to combination meter terminal (36)

^

from terminal (2) of the smart entrance control unit.

With the ignition switch in the ON or START position, power is supplied:

^

through 1O A fuse (No. (8) located in the fuse block [J/B])

^

to combination meter terminal (10) [(34]) for the air bag warning lamp

^

to combination meter terminal (22) and ([14]) and

^

to combination meter terminal (41).

Ground is supplied:

^

 to combination meter terminal 28 (10),

^

 through body grounds (M43) , (M44) and (M60).

Ground is supplied:

^

 to fuel tank gauge unit terminal (3) and

^

 seat belt buckle switch terminal (2)

^

 through body grounds (B14) and (B17).

Ground is supplied:

^

 to brake fluid level switch terminal (2) and

^

 washer fluid level switch terminal (2) (For Canada models only)

^

 through body grounds (E13) and (E25).

During prove out or when an air bag malfunction occurs, the ground path is interrupted:

^

 from the air bag diagnosis sensor unit terminal (15)

^

 to combination meter terminal 17 (15).

Ground is supplied:

^

 through combination meter terminal 28 (10).

With power and ground supplied, the air bag warning lamp (LEDs) illuminate.

Ground is supplied for each of the warning lamps through different terminals of the combination meter.
Terminal numbers in () are for models without tachometer.

Audible Warning Device|Testing and Inspection > < Diagram Information and Instructions|Page 10232