Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
/Page-2163001.png)
Brake Warning Indicator: Description and Operation
ABS Warning Lamp
If equipped with theft warning system, power is supplied at all times:
^
through 7.5 A fuse (No. (24) located in the fuse block [J/B])
^
to combination meter terminal (37) for the security lamp.
Ground for the security lamp is supplied when the system is activated:
^
to combination meter terminal (36)
^
from terminal (2) of the smart entrance control unit.
With the ignition switch in the ON or START position, power is supplied:
^
through 1O A fuse (No. (8) located in the fuse block [J/B])
^
to combination meter terminal (10) [(34]) for the air bag warning lamp
^
to combination meter terminal (22) and ([14]) and
^
to combination meter terminal (41).
Ground is supplied:
^
to combination meter terminal 28 (10),
^
through body grounds (M43), (M44) and (M60).
Ground is supplied:
^
to fuel tank gauge unit terminal (3) and
^
seat belt buckle switch terminal (2)
^
through body grounds (B14) and (B17).
Ground is supplied:
^
to brake fluid level switch terminal (2) and
^
washer fluid level switch terminal (2) (For Canada models only)
^
through body grounds (E13) and (E25).
During prove out or when an ABS malfunction occurs, ground is supplied:
^
to combination meter terminal (20) [(42)]
^
from ABS control unit terminal (30).
With power and ground supplied, the ABS warning lamp illuminates.
