nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Fuel Gauge > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Door/Trunk Ajar Indicator/Lamp: Description and Operation

If equipped with theft warning system, power is supplied at all times:

^

through 7.5 A fuse (No. (24) located in the fuse block [J/B])

^

to combination meter terminal (37) for the security lamp.

Ground for the security lamp is supplied when the system is activated:

^

to combination meter terminal (36)

^

from terminal (2) of the smart entrance control unit.

With the ignition switch in the ON or START position, power is supplied:

^

through 1O A fuse (No. (8) located in the fuse block [J/B])

^

to combination meter terminal (10) [(34]) for the air bag warning lamp

^

to combination meter terminal (22) and ([14]) and

^

to combination meter terminal (41).

Ground is supplied:

^

 to combination meter terminal 28 (10),

^

 through body grounds (M43), (M44) and (M60).

Ground is supplied:

^

 to fuel tank gauge unit terminal (3) and

^

 seat belt buckle switch terminal (2)

^

 through body grounds (B14) and (B17).

Ground is supplied:

^

 to brake fluid level switch terminal (2) and

^

 washer fluid level switch terminal (2) (For Canada models only)

^

 through body grounds (E13) and (E25).

When a door is open, ground is supplied:

^

 to combination meter terminal (15)

^

 from door switches terminal (1) and front door switch LH terminal (2).

With power and ground supplied, the door ajar warning lamp illuminates.

Fuel Gauge > < Air Bag(s) Arming and Disarming|Service and Repair