Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
Seat Belt: Service and Repair
Front Seat Belt
2-Door Coupe
CAUTION:
-
Do not disassemble buckle or seat belt assembly.
-
Replace anchor bolts if they are deformed or worn out.
-
Never oil tongue and buckle.
-
If any component of seat belt assembly is questionable, do not repair. Replace the seat belt assembly.
-
If webbing is cut, frayed, or damaged, replace seat belt assembly.
-
When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.
-
After any collision, inspect all seat belt assemblies, including retractors and other attached hardware.
2-Door Coupe
REMOVAL
Remove front seat.
1. Remove buckle.
2. Remove floor anchor bolt.
Remove rear side finisher.