Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
/Page-108001.png)
Key Reminder Switch: Description and Operation
Models Without Power Door Locks
The warning chime is controlled by the warning chime unit.
Power is supplied at all times:
^
through 7.5 A fuse (No. 24, located in the fuse block [J/B])
^
to key switch terminal (1).
Power is supplied at all times:
^
through 10 A fuse (No. 36, located in the fusible link and fuse box)
^ to lighting switch terminal (11).
With the ignition switch in the ON or START position, power is supplied:
^
through 7.5 A fuse (No. 7, located in the fuse block [J/B])
^
to warning chime unit terminal (1).
Ground is supplied to warning chime unit terminal (8) through body grounds (M43), (M44) and (M60).
When a signal, or combination of signals, is received by the warning chime unit, the warning chime will sound.
With the key in the ignition switch in the OFF or ACC position, and the driver's door open, the warning chime will sound. A battery positive voltage is
supplied:
^
from key switch terminal (2)
^
to warning chime unit terminal (5).
Ground is supplied:
^
to warning chime unit terminal (7)
^
from front door switch LH terminal (1).
Front door switch LH terminal (3) is grounded through body grounds (B14) and (B17) Light warning chime
