Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
Clutch: Service and Repair
High Clutch
DISASSEMBLY
1. Check operation of high clutch.
a. Apply compressed air to oil hole of input shaft. Stop up a hole on opposite side of input shaft.
b. Check to see that retaining plate moves to snap ring.
c. If retaining plate does not contact snap ring:
-
D-ring might be damaged.
-
Oil seal might be damaged.
-
Fluid might be leaking past piston check ball.
2. Remove seal rings from input shaft.