Nissan and Datsun Workshop Service and Repair Manuals > Sentra XE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997) > Transmission and Drivetrain | Manual Transmission/Transaxle | Shift Linkage, M/T | Component Information | Service and Repair | Shift Control

Page 1

Shift Linkage: Service and Repair
Striking Rod Oil Seal

1. Remove transaxle control rod from yoke.
2. Remove retaining pin.

Be careful not to damage boot.

3. Remove striking rod oil seal.

4. Install striking rod oil seal. Apply multi-purpose grease to seal lip of oil seal before installing.

Nissan and Datsun Workshop Service and Repair Manuals