Stanza L4-2389cc 2.4L SOHC MFI (KA24E) (1991)
29.
Install sound deadener material (e.g.: Q-pad) to the inner wheel house panel as shown.
30.
Install the trunk lid. Check clearances, grades and parallelism.
31.
Do not install, but keep in the vehicle:
^
Seat belt anchor bolt and spacer
^
Trunk finisher
^
Trunk carpet
^
Retractor cover
^
Original fuel filler tube in the plastic bag and cardboard box for dealer part retention
^
Replaced panels
^
Parcel shelf board
^
Rear seat and cushion
^
All C-pillar garnish
^
All trim/finishers
^
Weather stripping
^
Left and right plastic rear door kick plates
^
High-mounted stop lamp
32.
Reinstall all other parts in reverse order of removal (e.g.: rear windshield, suspension, etc.).
33.
Install the new fuel filler tube as outlined in Fuel Filler Tube Installation on pages 2-4. It may be necessary to re-seal any area disturbed by the fuel
filler tube.
34.
Prepare the vehicle for delivery back to the dealer.
Parts Information
PARTS INFORMATION
KIT A:
J30 P/N 17221-85E25
U12 P/N 17221-65E25