Stanza L4-2389cc 2.4L SOHC MFI (KA24E) (1991)
Heating Pistons
Pressing Wrist Pins
2. Heat piston to 60 to 70° C (140 to 158° F) or use piston pin press stand at room temperature.
3. Remove piston pin from connecting rod.
INSTALLATION
Piston Pin Hole Snap Ring
1. Install new snap ring on one side of piston pin hole.
CAUTION: Align the direction of piston and connecting rod.
Numbers stamped on connecting rod and cap correspond to each cylinder.
Piston And Rod Alignment