Stanza L4-2389cc 2.4L SOHC MFI (KA24E) (1991)
Fig. 6 Exploded View Of Wheel Hub & Knuckle
Fig. 5 Removing Knuckle Assembly.
Refer to Fig. 6, when replacing wheel hub and knuckle assembly.
1.
Remove wheel bearing locknut, then brake caliper.
2.
Separate tie rod from knuckle using a suitable tool, Fig. 4.
3.
Separate driveshafts from knuckle, remove knuckle attaching bolts as shown in Fig. 7, then knuckle.
4.
Reverse procedure to install, tighten wheel bearing to specifications.