Stanza L4-2389cc 2.4L SOHC MFI (KA24E) (1991)
Service procedures for reverse clutch are essentially the same as those for high clutch, with the following exception:
-
Remove reverse clutch piston.
Specified clearance between retaining plate and snap ring:
Standard 0.5 - 0.8 mm (0.020 - 0.031 in)
Allowable limit 1.2 mm (0.047 in)
Available retaining plates: Refer to Specifications. See: Specifications
-
After assembly check the operation of clutch.