Stanza Wagon L4-1974cc 2.0L SOHC (CA20E) (1986)
5.
Remove engine crossmember and rear engine mount and replace with the countermeasure mount.
Engine Crossmember
6.
Reinstall the engine crossmember and tighten engine mounting bolts as follows:
^
Tighten R.H., L.H. and rear engine mounting bolts first, then apply engine load to mounting insulators before tightening buffer rod and sub mounting.
^
Follow steps (1), (2), and (3) when tightening buffer rod and sub mounting.
7.
Reinstall splash shields.
WARRANTY INFORMATION
Refer to Section AG in the Warranty Flat Rate Manual for appropriate Warranty Information.