Body Control Module - System Description for Titan 2WD V8-56L (VK56) (2004)
-
When BCM is not in sleep status, OUTPUT terminals (1-5) each turn ON-OFF every 10 ms.
Sleep status
-
When BCM is in sleep mode, transistors of OUTPUT 1 and 5 stop the output, and BCM enters low-current-consumption mode. OUTPUTS (2,
3, and 4) turn ON-OFF at 10 ms intervals, and receives lighting switch input only.
CAN COMMUNICATION CONTROL
CAN communication allows a high rate of information through the two communication lines (CAN L-line, CAN H-line) connecting the various control