Titan 2WD V8-5.6L (VK56) (2004)
Body Control Module: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer's Scan Tool
CONSULT-II INSPECTION PROCEDURE
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carries out CAN communication.
1. With ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to data link connector and turn ignition switch ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch "BCM" on "SELECT SYSTEM" screen.
4. Select item to be diagnosed on "SELECT TEST ITEM" screen.