Titan 2WD V8-5.6L (VK56) (2004)
/Page-2081009.png)
b.
Carefully separate the sheet metal and install a piece of felt cloth tape in between the window channel and inner door sheet metal, as shown
in Figure 9.
^
The sheet metal may be stuck together with paint. A "pop" noise may occur when the paint is broken.
^
Felt cloth tape 68370-4B000 (listed in the Parts Information) is pre cut into 4 pieces. One piece is all you need for this.
12.
Test drive the vehicle to make sure the noise is gone.
13.
Reinstall all parts removed.
