Titan 2WD V8-5.6L (VK56) (2004)
Console Lamp: Service and Repair
CONSOLE ILLUMINATION LAMP (if equipped)
Removal
The console illumination lamp (1) is replaced as part of the map lamp assembly (2). Refer to INTERIOR ROOM LAMP.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Disconnect the negative battery terminal.
2. Remove overhead console. Refer to INTERIOR - HEADLINER.
3. Rotate console illumination lamp bulb (1) counterclockwise, then pull straight out away from map lamp assembly (2) to remove.