Titan 2WD V8-5.6L (VK56) (2004)
Figure 12
24. Make sure the "dimples" on the seat track mounting tabs are aligned with the holes in the seat track (see Figures 11 and 12).
Figure 13
25. Install and hand tighten both seat track mounting tab bolts (M6, 10 mm head, see Figure 13).
Figure 14
26. Next, install and tighten the six nuts (three on each side) with the base plates. This will secure the gear boxes (see Figure 14). Nut torque: 64-85
in-lb (7.17-9.69 Nm).
27. Re-install and tighten the two Seat Frame Side Bolts M8, 12 mm head (see Figure 14). Bolt torque: 13-17 ft-lb (17.5-23.7 Nm).