Titan 2WD V8-5.6L (VK56) (2004)
1. Write down the radio station presets.
2. Move / adjust the passenger seat bottom and seatback to the middle and upright positions.
3. Turn the ignition OFF. Disconnect both 12V battery cables, negative cable first, and wait at least 3 minutes before proceeding to step 4.
CAUTION:
Do not drop, tilt, or bump the side air bag module while removing/installing the seat. Always handle it with care.
4. Remove the four bolts holding the seat to the body.
5. Place the seat, back side down, on a clean covered workbench.
6. Remove the lower flap cover.