Titan 2WD V8-5.6L (VK56) (2004)
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Operation (P0) line claim using the claims coding shown.
SERVICE PROCEDURE
CAUTIONS:
^
Only a trained paint technician who is familiar with bedliner repair techniques should perform this repair.
^
The paint technician should also be familiar with and follow the specific VOC compliance regulations that apply to their geographic area.
^
Before attempting any repair, make sure you wear appropriate personal protective equipment for safety (respirator, solvent-proof gloves, face
shield/safety glasses, etc.).
NOTES:
^
"Durabed Surface Finisher is a special process intended for use on Nissan vehicles which come from the factory with a spray in bedliner (PPG
Industries, Inc. Durabed coating). The Durabed Surface Finishing kit is designed to restore a "like new appearance to a Durabed surface which
has become discolored.
^
The following Durabed surface finishing procedures offer a simple step by step approach to the reconditioning process. When done correctly the
PPG Durabed coating will have a similar look and texture as the original finish.
^
The entire bedliner must be refinished using this process.
^
For best results the following procedures must be followed in the order given and only the specified Durabed Surface Finishing materials should
be used.
Vehicle Preparation
1.
Remove the following items from the vehicle:
^
Util-track(TM) rails and covers*
^
Tie Down Hooks
^
Rubber plugs
^
Rubber Tailgate Stops** and Tailgate (if applicable).
* It may be necessary to heat up the Utili-track(TM) bolts with a pen torch (or suitable equivalent heating tool) to help remove the T-40 bolts. Be careful
NOT to damage the Durabed material when heating the bolts.