Titan 2WD V8-5.6L (VK56) (2004)
Adjustable Pedals
REMOVAL
WARNING: Do not deform the brake tube.
CAUTION:
^
Before removal and installation the accelerator and brake pedals must be in the forwardmost position (closest to the floor). This is to align the base
position of the accelerator and brake pedals (adjustable type only).
^
Do not disassemble the brake pedal adjusting mechanism (adjustable type only).
^
Avoid damage from dropping the brake pedal assembly during handling.
^
Keep the brake pedal assembly away from water.
1. Remove the lower driver instrument panel.
2. Remove the stop lamp switch and ASCD switch from the pedal assembly