Titan 2WD V8-5.6L (VK56) (2004)
Step 6: Install New Torque Member Kits.
NOTE:
This step is for vehicles with the old torque member version (see Step 5).
A.
Install the new Torque Members with new Torque Member Bolts (see Figure 4).
^
Torque members and torque member bolts are included in the Torque Member Kit listed in the Parts Information.
IMPORTANT:
>
Make sure the torque members are installed on the correct side. They are marked "L" for left side (driver side), and "R" for right side
(passenger side).
>
Make sure you use the new torque member anchor bolts. Do not reuse the old ones.
^
Tighten torque member bolts to 210 N.m (21 kg-m, 155 ft-lb).
Step 7
Step 7: Install the New Front Brake Pad Kit.
^
Kit Includes New Brake Pads, "Coated" Pad Retainers, and Metal Backing Shims.
A.
If the torque members you took off the vehicle are the new version (see Step 5), re-install them on the vehicle.
^
IMPORTANT:
Make sure to use new torque member anchor bolts. Do not reuse the old ones.