Titan 2WD V8-5.6L (VK56) (2004)
Brake Master Cylinder: Service and Repair
Disassembly and Assembly
Disassembly and Assembly
DISASSEMBLY
CAUTION:
^
Master cylinder cannot be disassembled.
^
Remove reservoir tank only when absolutely necessary.
1. Pull reservoir tank off master cylinder sub-assembly, then remove grommets from master cylinder subassembly body
2. Remove master cylinder pressure sensors.
ASSEMBLY
CAUTION:
^
Never use mineral oil such as kerosene or gasoline during the cleaning and assembly process.
^
Do not drop parts. If a part is dropped, do not use it.
1. Apply brake fluid or rubber grease to new grommets, then insert into master cylinder sub-assembly.
CAUTION: Do not reuse grommet.
2. Install reservoir tank onto master cylinder assembly.
3. Install master cylinder pressure sensors.