Titan 2WD V8-5.6L (VK56) (2004)
/Page-1516002.png)
^
Check thickness of lining.
Standard thickness "A": 3.79 ± 0.21 mm (0.149 ± 0.008 inch)
Repair limit thickness "A": 0.5 mm (0.020 inch)
Drum Inner Diameter Inspection
^
Check drum inner diameter
Standard inner diameter: 205 ± 0.13 mm (8.07 ± 0.01 inch)
Maximum inner diameter: 205.7 mm (8.10 inch)
Other Inspections
^
Check shoe sliding surface on back plate for excessive wear and damage.
^
Check anti-rattle pins for excessive wear and corrosion.
^
Check return springs for sagging.
^
Check adjuster for rough operation.
^
When disassembling adjuster, apply PBC (Poly Butyl Cuprysil) grease or equivalent to the threads.
^
Check either visually or with a vernier caliper to see if there is any excessive wear, cracks, or damage inside drum.
INSTALLATION
